Our company produces key-type inflatable shaft, using the latest technology and technology, all the spare parts are their own R & D and custom production to ensure product quality and stability. If you load the heavier load, inflatable shaft shaft body commonly used 45 # steel pipe, our steel pipe raw materials procurement and Shanghai Baosteel, decided to ensure quality. If the load light situation, you can use high-strength aluminum alloy tube, without loss of bearing Performance of the case, the maximum to reduce the weight of the inflatable shaft itself, so as to effectively reduce the labor intensity of labor when the inflatable shaft, and improve work efficiency.
This key-type inflatable shaft is characterized by a relatively heavy load, suitable for high strength, the use of relatively low precision working environment, for the use of relatively high demand products, but also custom processing.
When inflatable shaft is used, please ensure that the pressure of 6 kg or more to ensure the use of excellent results, and use our supporting the provision of special inflatable gun for inflatable operation, the use of can not fall or illegal operation, stored in dry places, and regularly wipe Grease to prevent the use of rust.
Key-type inflatable shaft is generally used in the need for a larger load, the use of a larger strength of the rewinding or unwinding of the use of occasions.
What is suitable for use with key-type pneumatic shafts?
1. When the weight of the product needs to be wound,
2. When the winding material does not need to be cut or single roll wide;
3. In the product used in the roll core or other material roll thicker or better quality when the roll.
2. What are the issues that need to be addressed when using key-type pneumatic shafts?
1. Keep the air pressure inside the pressure shaft to keep adequate;
2. In the winding or unwinding, if both ends of the core is not covered by the part of the application of empty core will be empty out of the part;
3. The pressure shaft should be placed horizontally when not in use, should not be suspended or erected, so as to avoid collision caused by deformation of the shaft.
3. What are the types and types of key-type pneumatic shafts?
1. In general, the main shaft of the pneumatic shaft is made of steel and aluminum alloy;
2. The material of the shaft is generally steel, can also be used according to customer requirements aluminum alloy, to reduce the weight of the pressure shaft;
3. Surface key is generally 100MM long steel key, can also be customized according to customer requirements rubber keys or other material keys;
4. If the customer has special quality requirements, you can customize the entire length of the long key-type pneumatic shaft.
Lug Type Air Shaft
